E-ISSN:2583-2468

Research Article

Artificial Intelligence

Applied Science and Engineering Journal for Advanced Research

2024 Volume 3 Number 5 September
Publisherwww.singhpublication.com

Enhancing Energy Efficiency in Green Buildings through Artificial Intelligence

Feng Z1*, Ge M2, Meng Q3
DOI:10.5281/zenodo.13948759

1* Zhang Feng, School of Civil Engineering, Southeast University, Nanjing, China.

2 Minyue Ge, School of Architecture, University of Southern California, Los Angeles, United States.

3 Qian Meng, School of Architecture and Design, University of Technology Sydney, Sydney, Australia.

Artificial Intelligence (AI) is poised to revolutionize the architectural design and energy management of green buildings, offering significant advancements in sustainability and efficiency. This paper explores the transformative impact of AI on improving energy efficiency and reducing carbon emissions in commercial buildings. By leveraging AI algorithms, architects can optimize building performance through advanced environmental analysis, automation of repetitive tasks, and real-time data-driven decision-making. AI facilitates precise energy consumption forecasting and integration of renewable energy sources, enhancing the overall sustainability of buildings. Our study demonstrates that AI can reduce energy consumption and CO2 emissions by approximately 8% and 19%, respectively, in typical mid-size office buildings by 2050 compared to conventional methods. Further, the combination of AI with energy efficiency policies and low-emission energy production is projected to yield reductions of up to 40% in energy consumption and 90% in CO2 emissions. This paper provides a systematic approach for quantifying AI's benefits across various building types and climate zones, offering valuable insights for decision-makers in the construction industry.

Keywords: artificial intelligence (ai), energy efficiency, green building design, carbon emissions reduction

Corresponding Author How to Cite this Article To Browse
Zhang Feng, , School of Civil Engineering, Southeast University, , Nanjing, China.
Email: 		Feng Z, Ge M, Meng Q, Enhancing Energy Efficiency in Green Buildings through Artificial Intelligence. Appl. Sci. Eng. J. Adv. Res.. 2024;3(5):10-17.
Available From
https://asejar.singhpublication.com/index.php/ojs/article/view/109

Manuscript Received Review Round 1 Review Round 2 Review Round 3 Accepted
2024-08-29 2024-09-14 2024-09-30
Conflict of Interest Funding Ethical Approval Plagiarism X-checker Note
Authors state no conflict of interest. Non Funded. The conducted research is not related to either human or animals use. 10.22 All authors have accepted responsibility for the entire content of this manuscript and approved its submission.

© 2024by Feng Z, Ge M, Meng Qand Published by Singh Publication. This is an Open Access article licensed under a Creative Commons Attribution 4.0 International License https://creativecommons.org/licenses/by/4.0/ unported [CC BY 4.0].

Appl. Sci. Eng. J. Adv. Res. 2024;3(5)10
Feng Z. et al. Enhancing Energy Efficiency in Green Buildings

Introduction

Artificial Intelligence (AI) has potential to revolutionize way we design and construct buildings, making them more environmentally friendly, energy-efficient, and sustainable. By leveraging advanced AI algorithms, architects and designers can analyze vast amounts of data and simulate various scenarios to create buildings that harmonize with their surrounding environment. [1]AI’s role in transforming sustainable architecture extends from material selection to energy optimization and integrating renewable energy sources. In realm of sustainable building design, AI offers unprecedented opportunities to enhance architectural performance and streamline path to green certifications. AI can assist in optimizing building performance by analyzing historical and real-time data to predict energy consumption patterns and identify areas for improvement. [2]Through sophisticated modeling and simulation, AI helps select most appropriate materials, contributing to energy efficiency and environmental sustainability.

Integrating renewable energy sources, such as solar panels and wind turbines, is another area where AI plays a crucial role. [3][4]AI-driven tools can forecast energy needs and supply, enabling buildings to utilize renewable resources more effectively and reduce their dependence on non-renewable energy sources. [5]Furthermore, AI can simplify process of obtaining green building certifications by automating compliance checks and documentation, thus reducing time and effort required for certification. In this paper, we will delve into transformative impact of AI on sustainable building design, exploring its various applications and benefits. We will reveal how AI optimizes building performance, aids in material selection, integrates renewable energy sources and streamlines certification process. Join us as we explore exciting possibilities that AI brings to sustainable architecture and how it shapes future of green buildings.

Current Situation of Energy Management in Green Building

Traditional Building Energy Management Methods
Energy Consumption Monitoring and Management
Traditional energy management in buildings typically involves manual monitoring and management practices to control energy consumption.

This process includes regular inspections, meter readings, and basic reporting systems to track energy use. Building managers often rely on periodic audits to identify areas of inefficiency and implement corrective measures[6][7]. For example, routine maintenance schedules may be established to ensure that HVAC systems and lighting are operating at peak efficiency. However, this approach often lacks real-time data and advanced analytics capabilities, which can limit its effectiveness in optimizing energy usage.

Traditional methods also involve using historical data to guide energy management decisions. This data can be gathered from utility bills and energy consumption records, which help in understanding consumption patterns and planning for energy-saving measures. [8]While useful, this approach can be reactive rather than proactive, as it depends on data collected over time and may not capture sudden changes in energy use or identify emerging inefficiencies promptly.
Limitations of Existing Technologies and Methods

The traditional methods of energy management face several limitations. One major issue is the lack of real-time monitoring capabilities. [9]Without real-time data, building managers may not be able to detect and address inefficiencies or equipment malfunctions immediately. This can result in higher energy costs and reduced operational efficiency. [10]Additionally, traditional methods often involve manual data entry and analysis, which can be time-consuming and prone to errors.

Table 1: Energy Consumption Monitoring Methods

MethodDescriptionAdvantagesLimitations
Manual InspectionsRegular checks and audits by facility managersSimple to implementLack of real-time data, reactive approach
Utility BillsAnalysis of historical energy consumption dataProvides historical contextMay not capture real-time changes
Basic ReportingPeriodic reports on energy usage and costUseful for trend analysisLimited by manual data entry and analysis

Another limitation is the difficulty in integrating various energy management systems and technologies. Traditional approaches may not easily accommodate advanced technologies such as smart meters, energy management systems (EMS)[11-13], and automated controls. As a result, buildings may miss opportunities to leverage modern solutions that can provide more accurate and actionable insights into energy consumption. This lack of integration can hinder efforts to implement comprehensive energy-saving strategies and achieve long-term sustainability goals.


Appl. Sci. Eng. J. Adv. Res. 2024;3(5)11
Feng Z. et al. Enhancing Energy Efficiency in Green Buildings

Table 2: Comparison of Traditional and Modern Energy Management Systems

FeatureTraditional SystemsModern Systems
Data CollectionManual and periodicReal-time and automated
MonitoringIntermittent inspectionsContinuous monitoring
Data AnalysisHistorical data analysisAdvanced analytics and forecasting
IntegrationLimited integration with other systemsSeamless integration with smart technologies

Tables 1 and 2 provide an overview of traditional energy management methods and highlights the differences between traditional and modern systems. [14]The limitations of traditional methods underscore the need for advanced technologies and more integrated approaches to effectively manage and optimize energy consumption in buildings.

Energy Demand Analysis
Current Energy Demand in Green Buildings

Green buildings are designed to reduce energy consumption significantly compared to traditional structures. The energy demand for such buildings is influenced by their advanced technologies, materials, and design strategies to minimize their environmental footprint. Key factors affecting energy demand include the efficiency of HVAC systems, insulation quality, and the integration of renewable energy sources. Green buildings achieve lower energy requirements by optimizing these elements, ultimately contributing to their sustainability goals[15].

asejar_109_01.JPG
Figure 1: Global Low-Carbon Office Space Demand vs. Construction Projects Supply (2024-2030)

Future Projections and Challenges

As the demand for green buildings grows, accurately forecasting future energy needs becomes essential. [16][17]Emerging trends, such as increased adoption of smart technologies and advancements in building materials, are expected to influence energy consumption patterns. Challenges in meeting these future energy demands include the need for ongoing innovations and improvements in green building practices.

Ensuring that energy requirements are met while maintaining sustainability objectives will be crucial for the continued success of green buildings.

Optimization Goal Setting
Defining Optimization Objectives

Setting clear optimization goals is vital for improving the energy efficiency of green buildings. These objectives should focus on reducing overall energy consumption, minimizing peak demand, and enhancing the integration of renewable energy sources. Specific targets can include lowering energy use intensity (EUI)[18], achieving higher ratings in energy performance benchmarks, and increasing the proportion of energy sourced from renewables. Effective goal setting involves analyzing current performance data and identifying areas with the highest potential for improvement.
Strategies for Achieving Optimization Goals

Green building projects should employ various strategies to achieve the set optimization goals. [19]These may include upgrading to energy-efficient systems, incorporating advanced building technologies such as smart grids and automated controls, and adopting best practices in energy management. [20]Regular monitoring and adjusting strategies based on performance metrics will help maintain progress toward the goals. Collaboration with stakeholders, including architects, engineers, and facility managers, is also essential to implement optimization measures successfully.

The Role of Artificial Intelligence in Architectural Design

Artificial intelligence (AI) is leading a revolution in architectural design, with far-reaching and multifaceted implications that offer architects and designers unprecedented advantages[21]. Through artificial intelligence algorithms, the building design process has become more efficient, intelligent and sustainable, thus driving the modernization of the construction industry.

Analysis and Optimization of Environmental Factors

One of the advantages of artificial intelligence in architectural design is its strong ability to analyze the environment. [22]By utilizing advanced machine learning algorithms, AI is able to process and analyze vast amounts of environmental data, such as sunshine patterns, wind direction changes, climate conditions, and energy demand.


Appl. Sci. Eng. J. Adv. Res. 2024;3(5)12
Feng Z. et al. Enhancing Energy Efficiency in Green Buildings

This allows architects to generate designs that best meet the requirements of the environment. For example, an internationally renowned architectural design firm used an AI system to analyze the surroundings of a proposed office building. [23]By simulating different daylight angles and wind speeds, AI generated an optimal design that not only optimized the building's natural lighting, but also improved ventilation efficiency. As a result, this design solution combines passive solar strategies and natural ventilation systems to significantly reduce the building's energy requirements and achieve significant energy savings.

Automation and Repetitive Task Handling

AI in architectural design can also automate a large number of repetitive tasks, such as drawing and 3D modeling. This automation not only improves design efficiency, but also reduces the possibility of human error. For example, architects often spend a lot of time on complex 3D model creation and detail adjustments, while AI systems can quickly complete these tasks, allowing designers to devote more energy to creative design work. [24-27]An architecture firm has used AI tools to automatically generate multiple design versions, quickly screening out the most promising solutions, thus greatly reducing the design cycle of the project.

Real-Time Feedback and Data-Driven Decision-Making

Another important function of AI is to provide real-time feedback to help architects make data-driven decisions during the design process. AI systems are able to assess the environmental impact of different design options in real time and provide recommendations for optimization. For example, a green building design firm uses AI algorithms to evaluate different design options when designing a new residential building. [28]The AI system analyzed the energy consumption, carbon emissions and indoor environmental quality of each design proposal and provided recommendations for optimization. In the end, the architects adjusted the design based on the AI feedback, significantly improving the overall sustainability of the building.

Case Study and Practical Application

To illustrate the role of AI in architectural design more specifically, consider the following example: A well-known architectural design firm developed an innovative green office building using AI technology. [29]The office building features an AI-generated design that takes into account the sunlight and wind direction of the surrounding environment and optimizes the building's energy use.

AI also helped company select most suitable building materials and predicted energy efficiency performance of different designs through simulation tests. In end, office building successfully received a number of green building certifications, becoming industry benchmark.

Table 3: Advantages of Artificial Intelligence in Architectural Design and Their Practical Examples

Advantages of AI in Architectural DesignDescriptionExamples
Generating Design Options Based on Specific RequirementsAI algorithms analyze user preferences and project constraints to create design options that meet client needs.AI algorithms analyzed user preferences and project constraints to generate a building design that precisely met client’s specifications.
Sustainability Design OptimizationAI analyzes environmental factors and optimizes designs to minimize energy consumption and environmental impact.AI examined sunlight exposure and wind patterns to create a design that incorporates passive solar strategies and natural ventilation for energy efficiency.
Automation of Repetitive TasksAI automates tasks such as drawing and 3D modeling, allowing architects to focus more on creative and innovative work.AI automated creation of 3D models and detailed drawings, freeing architects to concentrate on developing innovative and unique design concepts.
Data-Driven Decision MakingAI provides real-time feedback on environmental impact of design choices, enabling architects to make informed decisions.AI provided real-time analysis of different design options’ environmental impacts, allowing architects to adjust designs for better sustainability.

In conclusion, AI is revolutionizing way buildings are designed, enabling architects to create more sustainable, efficient buildings. [30][31]Through environmental data analysis, automated task processing and real-time feedback, AI is not only improving design quality, but also driving green transformation of construction industry. With continuous advancement of technology, we have reason to believe that future of building design will be more intelligent, environmentally friendly, and towards a comprehensive sustainable direction.

AI Iimproves Energy Efficiency in Green Buildings

Climate change is a key theme and challenge in past and present, and countries around world have set various targets to limit global warming. Among them, United States is expected to reduce greenhouse gas (GHG) pollution by 50 to 52 percent in 2030 compared with 2005. China expects its CO2[33] emissions to peak by 2030; The European Union proposes to reduce GHG emissions by at least 55% by 2030 compared with 1990 levels. With rapid global urbanization, world's urban population is expected to increase to 68% by 2050, which will generate a large number of new buildings.


Appl. Sci. Eng. J. Adv. Res. 2024;3(5)13
Feng Z. et al. Enhancing Energy Efficiency in Green Buildings

Construction is one of the leading sources of energy consumption and CO2 emissions in the United States. In 2011, the construction industry accounted for 39% of total energy consumption in the United States. To improve energy efficiency and achieve CO2 reduction targets, research into building energy efficiency is essential.

With the rapid development of computer technology, artificial intelligence (AI) is gradually popularized. AI is used in different fields, such as computer vision, robotics, natural language processing, etc. In recent years, AI has also been used to improve energy efficiency and reduce CO2 emissions in areas such as buildings, transportation and industry. Existing studies have shown that building energy consumption and CO2 emissions have great energy saving potential (2%-60%), but there is a lack of systematic and standard quantification methods. A building is a complex system involving multiple components (such as walls, Windows, HVAC and lighting systems) and construction phases (planning, analysis, development and construction), and AI has the potential to reduce costs, reduce risks and improve the health and well-being of people at all stages of construction. In addition, the interaction between residents and building components is non-linear, making it difficult for traditional rule-based control algorithms to capture. [34]With advanced AI algorithms such as deep learning and reinforcement learning, AI models learn from running data and iterate themselves through continuous real-time data to optimize objective functions and improve performance.

Efficiency Changes in Green Building Energy (Climate Change)

AI is an emerging technology in the construction industry that can reduce energy consumption and CO2 emissions, thereby adapting to climate change. However, the energy saving potential of AI in buildings is not yet clear, and there is a lack of systematic quantification standards. In addition, the optimal mechanism for AI to reduce energy consumption and CO2 emissions in buildings is not yet clear.

This paper explores the potential impact of AI on improving energy efficiency and reducing CO2 emissions in commercial buildings and proposes a systematic approach to quantify the benefits of AI in various types of buildings other than commercial buildings. Specifically, a four-bond structure is proposed to decouple the system and evaluate the theoretical maximum energy saving potential of a single building during its life cycle[35].

The energy saving potential of different climate zones is different, and the impact of AI scale is quantified through the development of energy efficiency technology applications and building stock modeling.

Construction costs and deep retrofit costs for new and existing medium-sized office buildings were considered according to climate zones, and building inventory turnover and technology adoption were calculated to predict the impact of AI at scale; The advantages of introducing AI technology are analyzed.

asejar_109_02.JPG
Figure 2: Base year electricity consumption by use and climate zone

asejar_109_03.JPG
Figure 3: Integrated technology building energy efficiency potential for a typical mid-size office building in the United States

asejar_109_04.JPG
Figure 4: Energy consumption by scenario


Appl. Sci. Eng. J. Adv. Res. 2024;3(5)14
Feng Z. et al. Enhancing Energy Efficiency in Green Buildings

Discussion

This study explores the potential impact of artificial intelligence (AI) in improving energy efficiency and reducing carbon emissions in commercial buildings. The main conclusions are as follows: AI can help reduce the cost premium of high-energy buildings (HEEBs) and zero-energy buildings (NZEBs), thereby increasing their market share penetration. Compared to a conventional (BAU) scenario without AI[36], mass adoption of AI technologies is expected to reduce energy consumption and CO2 emissions by about 8% and 19%, respectively, in a typical mid-size office building in the United States by 2050.

Combining AI with energy efficiency policies and low-emission energy production (LEPG) is expected to reduce energy consumption and CO2 emissions by approximately 40% and 90%, respectively, for a typical mid-size office building in the US under the 2050 BAU scenario. This paper is helpful in providing decision-makers with quantitative decision support for energy saving and emission reduction when promoting the development of AI in the construction industry.

As a general approach, the AI energy-saving potential of other building types, other regions, or countries can be assessed simply by appropriately adjusting the input parameters to the specific characteristics and energy consumption patterns of each building category. Using the same analytical framework and considering the unique characteristics of different building types, the methods presented here can be generalized to a wider range of cases, providing unique insights and high-level conclusions.

Conclusion

In summary, Artificial Intelligence (AI) represents a groundbreaking advancement in enhancing energy efficiency and sustainability in green buildings. The construction industry can substantially improve environmental performance by integrating AI into architectural design and energy management processes. AI's capabilities in analyzing complex environmental data, automating routine tasks, and providing real-time feedback enable architects and engineers to create buildings that are more energy-efficient and better aligned with sustainable practices. The adoption of AI-driven solutions in green building design holds potential to significantly reduce energy consumption and carbon emissions across various building types and climates.

As AI technology evolves, its application will likely become increasingly integral to achieving ambitious sustainability goals and advancing the future of environmentally responsible construction. This transformative potential underscore the need for continued research and investment in AI to fully realize its benefits for the green building sector.

References

1. Li, S. , Lin, R. , & Pei, S. (2024). Multi-modal preference alignment remedies regression of visual instruction tuning on language model. arXiv preprint arXiv:2402.10884 [Crossref][PubMed][Google Scholar]

2. Li, S. , & Tajbakhsh, N. (2023). Scigraphqa: A large-scale synthetic multi-turn question-answering dataset for scientific graphs. arXiv preprint arXiv:2308.03349 [Crossref][PubMed][Google Scholar]

3. Liu, H. , Xie, R. , Qin, H. , & Li, Y. (2024). Research on dangerous flight weather prediction based on machine learning. arXiv preprint arXiv:2406.12298 [Crossref][PubMed][Google Scholar]

4. Liu, H. , Shen, F. , Qin, H. , & Gao, F. (2024). Research on flight accidents prediction based back propagation neural network. arXiv preprint arXiv:2406.13954 [Crossref][PubMed][Google Scholar]

5. Lai, S. , Feng, N. , Sui, H. , Ma, Z. , Wang, H., Song, Z., ... & Yue, Y. (2024). FTS: A framework to find a faithful timesieve. arXiv preprint arXiv:2405.19647 [Crossref][PubMed][Google Scholar]

6. Wang, H. , Li, J. , & Li, Z. (2024). AI-generated text detection and classification based on BERT deep learning algorithm. arXiv preprint arXiv:2405.16422 [Crossref][PubMed][Google Scholar]

7. Zhang, X. , Xu, L. , Li, N. , & Zou, J. (2024). Research on credit risk assessment optimization based on machine learning [Crossref][PubMed][Google Scholar]

8. Huang, D. , Xu, L. , Tao, W. , & Li, Y. (2024). Research on genome data recognition and analysis based on louvain algorithm [Crossref][PubMed][Google Scholar]

9. Huang, D. , Liu, Z. , & Li, Y. (2024). Research on tumors segmentation based on image enhancement method. arXiv preprint arXiv:2406.05170 [Crossref][PubMed][Google Scholar]


Appl. Sci. Eng. J. Adv. Res. 2024;3(5)15
Feng Z. et al. Enhancing Energy Efficiency in Green Buildings

10. Li, B. , Zhang, X. , Wang, X. A. , Yong, S., Zhang, J., & Huang, J. (2019, April). A feature extraction method for daily-periodic time series based on AETA electromagnetic disturbance data. in Proceedings of the 2019 4th International Conference on Mathematics and Artificial Intelligence, pp. 215-219 [Crossref][PubMed][Google Scholar]

11. Li, B. , Zhang, K. , Sun, Y. , & Zou, J. (2024). Research on travel route planning optimization based on large language model [Crossref][PubMed][Google Scholar]

12. Li, B. , Jiang, G. , Li, N. , & Song, C. (2024). Research on large-scale structured and unstructured data processing based on large language model [Crossref][PubMed][Google Scholar]

13. Yang, J. , Qin, H. , Por, L. Y. , Shaikh, Z. A., Alfarraj, O., Tolba, A., ... & Thwin, M. (2024). Optimizing diabetic retinopathy detection with inception-V4 and dynamic version of snow leopard optimization algorithm. Biomedical Signal Processing and Control, 96, 106501 [Crossref][PubMed][Google Scholar]

14. Zhang, Y. , Qu, T. , Yao, T. , Gong, Y. , & Bian, X. (2024). Research on the application of BIM technology in intelligent building technology. Applied and Computational Engineering, 61, 29-34 [Crossref][PubMed][Google Scholar]

15. Chen, Z. , Ge, J. , Zhan, H. , Huang, S. , & Wang, D. (2021). Pareto self-supervised training for few-shot learning. in Proceedings of the IEEE/CVF Conference on Computer vision and Pattern Recognition, pp. 13663-13672 [Crossref][PubMed][Google Scholar]

16. Zhou, Q. (2024). Application of black-litterman bayesian in statistical arbitrage. arXiv preprint arXiv:2406. 06706 [Crossref][PubMed][Google Scholar]

17. Zhou, Q. (2024). Portfolio optimization with robust covariance and conditional value-at-risk constraints. arXiv preprint arXiv:2406. 00610 [Crossref][PubMed][Google Scholar]

18. Yaghjyan, L. , Heng, Y. J. , Baker, G. M., Bret-Mounet, V., Murthy, D., Mahoney, M. B., ... & Tamimi, R. M. (2022). Reliability of CD44, CD24, and ALDH1A1 immunohisto chemical staining: Pathologist assessment compared to quantitative image analysis. Frontiers in Medicine, 9, 1040061 [Crossref][PubMed][Google Scholar]

19. Rosner, B. , Glynn, R. J. , Eliassen, A. H., Hankinson, S. E., Tamimi, R. M., Chen, W. Y., ... & Tworoger, S. S. (2022). A multi-state survival model for time to breast cancer mortality among a cohort of initially disease-free women. Cancer Epidemiology, Biomarkers & Prevention, 31(8), 1582-1592 [Crossref][PubMed][Google Scholar]

20. Gupta, S. , Motwani, S. S. , Seitter, R. H., Wang, W., Mu, Y., Chute, D. F., ... & Curhan, G. C. (2023). Development and validation of a risk model for predicting contrast-associated acute kidney injury in patients with cancer: evaluation in over 46,000 CT examinations. American Journal of Roentgenology, 221(4), 486-501 [Crossref][PubMed][Google Scholar]

21. Shimizu, S. , Nakai, K. , Li, Y. , Mizumoto, M. , Kumada, H., Ishikawa, E., ... & Sakurai, H. (2023). Boron neutron capture therapy for recurrent glioblastoma multiforme: imaging evaluation of a case with long-term local control and survival. Cureus, 15(1) [Crossref][PubMed][Google Scholar]

22. Kumada, H. , Li, Y. , Yasuoka, K. , Naito, F. , Kurihara, T., Sugimura, T., ... & Sakae, T. (2022). Current development status of iBNCT001, demonstrator of a LINAC-based neutron source for BNCT. Journal of Neutron Research, 24(3-4), 347-358 [Crossref][PubMed][Google Scholar]

23. Zheng, Q. , Yu, C. , Cao, J. , Xu, Y. , Xing, Q., & Jin, Y. (2024). Advanced payment security system: XGBoost, CatBoost and SMOTE integrated. arXiv preprint arXiv:2406.04658 [Crossref][PubMed][Google Scholar]

24. Yu, C. , Jin, Y. , Xing, Q. , Zhang, Y. , Guo, S., & Meng, S. (2024). Advanced user credit risk prediction model using LightGBM, XGBoost and Tabnet with SMOTEENN. arXiv preprint arXiv:2408.03497 [Crossref][PubMed][Google Scholar]

25. Haowei, M. , Ebrahimi, S. , Mansouri, S. , Abdullaev, S. S., Alsaab, H. O., & Hassan, Z. F. (2023). CRISPR/Cas-based nanobiosensors: A reinforced approach for specific and sensitive recognition of mycotoxins. Food Bioscience, 56, 103110 [Crossref][PubMed][Google Scholar]

26. Yu, C. , Xu, Y. , Cao, J. , Zhang, Y. , Jin, Y., & Zhu, M. (2024). Credit card fraud detection using advanced transformer model. arXiv preprint arXiv:2406.03733 [Crossref][PubMed][Google Scholar]


Appl. Sci. Eng. J. Adv. Res. 2024;3(5)16
Feng Z. et al. Enhancing Energy Efficiency in Green Buildings

27. Ma, H. , Xu, C. , & Yang, J. (2023). Design of fine life cycle prediction system for failure of medical equipment. Journal of Artificial Intelligence and Technology, 3(2), 39-45 [Crossref][PubMed][Google Scholar]

28. Restrepo, D. , Wu, C. , Cajas, S. A. , Nakayama, L. F., Celi, L. A. G., & Lopez, D. M. (2024). Multimodal deep learning for low-resource settings: a vector embedding alignment approach for healthcare applications. medRxiv, 2024-06 [Crossref][PubMed][Google Scholar]

29. Restrepo, D. , Wu, C. , Vásquez-Venegas, C. , Nakayama, L. F., Celi, L. A., & López, D. M. (2024). DF-DM: A foundational process model for multimodal data fusion in the artificial intelligence era. Research Square [Crossref][PubMed][Google Scholar]

30. Li, J. , Wang, Y. , Xu, C. , Liu, S. , Dai, J., & Lan, K. (2024). Bioplastic derived from corn stover: Life cycle assessment and artificial intelligence-based analysis of uncertainty and variability. Science of The Total Environment, 174349 [Crossref][PubMed][Google Scholar]

31. Xiao, J. , Wang, J. , Bao, W. , Deng, T. , & Bi, S. (2024). Application progress of natural language processing technology in financial research. Financial Engineering and Risk Management, 7(3), 155-161 [Crossref][PubMed][Google Scholar]

32. Guan, Bo, Jin Cao, Bingjie Huang, Zhuoyue Wang, Xingqi Wang, and Zixiang Wang. (2024). Integrated method of deep learning and large language model in speech recognition. . [Crossref][PubMed][Google Scholar]

33. Moukheiber, D. , Restrepo, D. , Cajas, S. A. , Montoya, M. P. A., Celi, L. A., Kuo, K. T., ... & Kuo, P. C. (2024). A multimodal framework for extraction and fusion of satellite images and public health data. Scientific Data, 11(1), 634 [Crossref][PubMed][Google Scholar]

34. Wu, C. , Restrepo, D. , Nakayama, L. F. , Ribeiro, L. Z., Shuai, Z., Barboza, N. S., ... & Andrade, R. E. (2024). mBRSET: A portable retina fundus photos benchmark dataset for clinical and demographic prediction. medRxiv, 2024-07 [Crossref][PubMed][Google Scholar]

35. Cajas, S. A. , Restrepo, D. , Moukheiber, D. , Kuo, K. T., Wu, C., Chicangana, D. S. G., ... & Celi, L. A. A multi-modal satellite imagery dataset for public health analysis in Colombia [Crossref][PubMed][Google Scholar]

36. Wu, C. , Yang, X. , Gilkes, E. G. , Cui, H., Choi, J., Sun, N., ... & Nakayama, L. (2023, October). De-identification and obfuscation of gender attributes from retinal scans. In: Workshop on Clinical Image-Based Procedures, pp. 91-101. Cham: Springer Nature Switzerland [Crossref][PubMed][Google Scholar]


Appl. Sci. Eng. J. Adv. Res. 2024;3(5)17